AQUABETA CLEAR 2K

WATERBASED CLEARCOAT

Water base 2K clearcoat made of polyacrylic resins compatible with hydrophile polyisocianates with low solvent components.
Purposely studied for its compatibility with water based paints, it allows working respecting paint worker’s health and the latest environmental laws.
AQUABETA 2K features a large mechanical and chemical resistance and an excellent depth of gloss.
To obtain an optimal use of these water based products, it is necessary have an oven suitable with a minimum recycle of air of 24000 m3/hour.
AQUABETA 2K has a low content of volatic compound, so it observes theDirective 2004/42/CE of the European Parliament about environmental preservation.

Mix thoroughly the components that are inside the box before use.
Mixing ratio: 3 : 1
AQUABETA 2K: 100 parts
AQUABETA 2000: 33 parts
AQUABETA CRIL: 40 parts
Clean and dry the surface before application.
Pot life: 2 hours at 20°C
Nozzle diameter:
Gravity feed spray: 1,2-1,4mm
Suction feed spray: 1.6-1.7mm
Pressure: 4 bar
Final thickness of the layer: 40-50 micron
Apply a first light coat, then flash off for 5 mins.
Apply a full wet coat, flash off again for further 5 mins then dry in the oven for 45 min. at 60°C (140°F) or for 12 hours at room temperature.
Eventually sand after 24 hours.
Avoid applying excessively thick overlaps as this will cause slow flash and increase drying times

PACKING:

6 KITS CONTAINING:
AQUABETA 2K 1L
AQUABETA 2000 MS 0.33L
AQUABETA CRIL 0.40L

Download card